中文 | RSS | XML

Business Consulting Phone:13081647847

产品中心

Product Categoriesproduct

Aluminum alloy electronic radiator

  • category:Electronic radiator

  • The number of clicks:
  • Release date:2018/05/23
  • Online Inquiry
Detailed introduction

How Aluminum Alloy Electronic Radiator Performs Maintenance:


铝合金电子散热器


1. Electronic heat sinks should not come into contact with any acids, alkalis, or other corrosive properties.

2. The use of soft and hard water is recommended to be used after softening to avoid the internal clogging of the electronic radiator and the generation of scale.

3, in the use of antifreeze, in order to avoid the corrosion of electronic radiators, please be sure to use the regular manufacturers and meet the national standard long-term anti-rust antifreeze.

4. During the process of installing the electronic heat sink, please do not damage the heat-dissipation belt (chips) and damage the electronic heat sink to ensure heat dissipation and sealing.

5. When the electronic radiator is completely filled with water and then filled with water, the water release switch of the engine block must be turned on first, and when the water flows out, it is closed again to avoid blisters.

6, in daily use should check the water level at any time, to stop cooling after adding water. When adding water, slowly open the water tank cover, and the operator should be far away from the water inlet as far as possible to prevent burns from the high-pressure steam oil filling nozzle.

7. In winter, in order to prevent core cracking caused by ice formation, such as long-term parking or indirect parking, the water tank cover and water release switch should be used to release all the water.

8, standby electronic radiator effective environment should be kept ventilated and dry.

9, depending on the actual situation, the user should completely clean the electronic radiator once in 1 to 3 months. When cleaning, rinse with clean water along the reverse air inlet side.

10. The water level meter should be cleaned once every 3 months or depending on the actual situation, the parts should be removed and cleaned with warm water and non-corrosive detergent.


If you have any questions, please contact us. We will answer your questions one by one.

URL of this article:http://en.xinhuoxin.com/product/603.html

Key words:铝合金模板,铝合金模板价格,新型铝合金模板

Recently Viewed: