中文 | RSS | XML

Business Consulting Phone:13081647847

产品中心

Product Categoriesproduct

Aluminum Motor Housing

  • category:Motor shell

  • The number of clicks:
  • Release date:2018/05/23
  • Online Inquiry
Detailed introduction

铝合金电机壳


As the new aluminum alloy shell has many advantages such as light weight, good ductility, high-density tensile properties, etc., the commonly used brand 6063 aluminum alloy shell has been widely used in the motor industry, followed by the aluminum alloy shell and The assembly problem of the stator also arises immediately. Due to the large amount of interference and the special nature of aluminum materials, it is not possible to use the cold press method. Only the hot pack method can be used.


The traditional hot-packing method uses open flames, electric ovens, and traditional bearing heaters. These three methods of operation all have problems such as high energy consumption, uneven heating, unclean surfaces, and low efficiency, especially when the aluminum shell is anodized. The above three methods will often cause the problem of blistering on the surface of the aluminum shell that is heated during heating, and the cooling time after assembly is too long. For this reason, Jun Tai Technology's professional design team has been researching and designing for many years, and the traditional bearing heater design is based on the material of the aluminum shell. , Conductive and other factors have made bold improvements, developed a new type of GJT30H standard type, extended type, large size, such as high power, large capacity, fast heating, better uniformity, less vibration in the heating process and other advanced features. The power double-motor motor aluminum shell induction heater fundamentally solves the above problems.

URL of this article:http://en.xinhuoxin.com/product/591.html

Key words:铝合金电机壳,铝合金电机壳厂,铝合金电机壳厂家

Previous:None
Next:Aluminum Motor Housing

Recently Viewed:

Related news: