中文 | RSS | XML

Business Consulting Phone:13081647847

产品中心

Product Categoriesproduct

Industrial Aluminum Profile Supplier

  • category:Industrial aluminum profiles

  • The number of clicks:
  • Release date:2018/05/23
  • Online Inquiry
Detailed introduction

Industrial aluminum manufacturers share the installation of aluminum templates:


First, the installation of beam formwork


1. After the installation of the wall template is completed, the position of the template and the ink line should be initially checked for accuracy. If the deviation is relatively large, it should be checked promptly. Otherwise, after installing the beam formwork, the entire system will be difficult to adjust.

2. Install beam molds on the bench.

3. Pay attention to the direction of the beam bottom template, especially the template of the water hole.


工业铝型材厂家


Second, the installation of the floor template


1. Install the floor template on the operator's station.

2. Pay attention to the direction of the template, especially the template for water holes.

3. After the beam side formwork is installed, the corner formwork and the floor support beams must be installed. Then install the floor template.

4. After installation, it is necessary to check whether the support and connecting parts are firm, so that the person can apply the mold release agent.


Third, the reinforcement of the wall template


1. The reinforcement used must be installed in accordance with each part, and no confusion is forbidden.

2. Do not drill holes in the wallboard to change the hole position.

3. Be sure to tighten the pull bolt, but to grasp the strength.

4. Some parts of the periphery are reinforced with hoist or basket bolts according to the actual situation.

URL of this article:http://en.xinhuoxin.com/product/571.html

Key words:工业铝型材供应,工业铝型材厂家,工业铝型材供应商

Recently Viewed: